Ubit 12 Pack Latest PCI-E Riser Express Cable 16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable

Features:

  1. Multi-interface: 4PIN, SATA and Graphic card 6PIN interface, three interface optional. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment.
  2. LED indicator and fuse are used on the board: Indicates the connection status between your devices
  3. Added coil to prevent interference?Long time work will produce electromagnetic waves, affecting transmission?This special coil unit absorbs this electromagnetic wave.
  4. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices.
  5. No drivers needed.
  6. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
  7. Board dimensions: 13cm x 3cm x 1.2cm

Package includes:

  • 12x PCI-E 16X riser board
  • 12x PCI-E 1X adapter card
  • 12x 60cm USB 3.0 riser cable
  • Ubit Hook Cable Ties

Product Features

  • More Port option: molex, SATA and Graphic card 6PIN interface, three interface optional. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment.
  • LED indicator and fuse are used on the board: Indicates the connection status between your devices.
  • 3 Solid Capacitors deliver power to Graphics stably and Added coil to prevent interference,Long time work will produce electromagnetic waves,affecting transmission,This special coil unit absorbs this electromagnetic wave.
  • 60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
  • This product is suitable for motherboard with PCI-E slot. Please plug in the power of floppy drive while using it. Make sure the computer is out of power when you plug in or out the PCI-E extension cable.

Shares
|ShareTweet

3 comments

  • Anonymous

    UBit PCIe Risers with power LED Good quality units, with all the components installed on the printed circuit board (PCB). Some of these risers are missing several components, as a cost savings move. The extra capacitors should help with power filtering. All six risers worked out of the box, which is more than I can say for others that I have bought.Each board has three types of power: PCIe 6-pin, Molex and SATA. I hate molex, so with they would have just dropped this. Newer Power Supply Units (PSU) don’t have as…

  • Anonymous

    Horrible….80% defect rate, bricked 2, maybe even 4. RX580’s I have 2 brand new GPU confirmed as “bricked” by these risers, maybe even 4. As reviews from various websites suggest, the items have a very high defect rate. I purchased these items understanding these might have a high defect rate, because who knows, if I had 6 and 2-3 were defective, I could still use the working ones, and Amazon’s great return policy will help.I’m currently building a 6 GPU rig and these things are pretty easy to install, there is really only one way to…

  • Anonymous

    Solid risers with a fantastic LED feature. These risers come packaged and appear no different than any other risers I have used in the past. After opening them is where you start to notice the difference. They are slightly skinnier than normal risers and have a few different options for powering them. I choose to use the 6 pin power connections which they come with. They are slightly heavier than a typical riser and overall feel to be a better quality. I did notice they come equipped with 3 capacitors instead of the standard 4, I am not…

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.