Ubit 6 Pack Latest PCI-E Riser Adapter Card 16x to 1x (6pin/Molex/SATA) Led Graphics Extension ETH Ethereum/BIT Bitcoin/XMR Monero Mining Powered with 60cm USB 3.0 Cable(Ver103)

Features:
-Multi-interface: 4Pin molex, SATA and Graphic card 6Pin interface, three interface optional. The top of the line solution for setting up bitcoin mining rigs (or any other GPU-mined ALTCOIN), whether small open air rigs or large rack based miners, and securing your investment.
-LED indicator and fuse are used on the board: Indicates the connection status between your devices.
-Devices that do not need to be driven.
-PCI-E 1x to 16x riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.

Additional information:
1.This product is suitable for motherboard with PCI-E slot. Please plug in the power of floppy drive while using it,Make sure the computer is out of power when you plug in or out the PCI-E extension cable.
2.The cables inside are specially made,Please do not replace them with other cables.
3.To prevent ruining your computers and other equipment, please find the right end to plug in the cable.
4.Use old flat cable for Dual core graphics card and 16X motherboard.
5.Since there are three power options on the card, the four mounting holes on the card locate a little differently from those cards that have only one power option,See the location details in pictures.
6.Added coil to prevent interference,Long time work will produce electromagnetic waves,affecting transmission,This special coil unit absorbs this electromagnetic wave.

Packageincludes:
·6x PCI-E riser board
·6x PCI-E 1X adapter card
·6x 60cm USB 3.0 riser cable
·Ubit Hook Cable Ties
(Note:6pin to 15-pin SATA Power Cable are not including)

TIPS:
1.Please check the picture to make sure that our product is exactly the same as yours before you bid.
2.If you have any pre-sale or after-sale questions please feel free to contact us,we will be happy to assist you.May joy and health be with you always.

Product Features

  • The Upgraded PCI-E Riser with 4Pin+6Pin+SATA interfaces, each interface can directly connect to your power supply, which reducing the burden on the motherboard and ensuring maximum compatibility with your power supply.
  • The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment.
  • LED indicator and fuse are used on the board: Indicates the connection status between your devices.Plug and play, no driver needed to install.
  • 3 Solid Capacitors deliver power to Graphics stably and Added coil to prevent interference,Long time work will produce electromagnetic waves,affecting transmission,This special coil unit absorbs this electromagnetic wave.
  • 60cm USB 3.0 cable, very soft and easy to place and route,Cable with shield net inside is more stable for mining,PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.