YieldFarming – Liquidity Mining – NFT

Relper-Lineso V009S Latest PCI-E Riser Express Cable 16x TO 1x (6P / 4P / SATA) With Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm OD5.5 USB 3.0 Cable (1 Pack V009S)

Multi-interface: 4Pin Molex, SATA 15Pin and Graphic card 6PIN interface, three interface optional.
The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin),
whether small open air rigs or large rack based miners, and securing your investment.
PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
Board dimensions: 13cm x 4.5cm x 1.8cm 1. This product is suitable for motherboard with PCI-E slot.
Please plug in the power of floppy drive while using it.

1.Make sure the computer is out of power when you plug in or out the PCI-E extension cable.
2. The cables inside are specially made. Please do not replace them with other cables.
3. To prevent ruining your computers and other equipment, please find the right end to plug in the cable.
4. Use old flat cable for Dual core graphics card and 16X motherboard.
5. Since there are three power options on the card, the four mounting holes on the card locate a little
differently from those cards that have only one power option. See the location details in pictures.
6. Please contact us if you have any issue with the product.

Features:
1. 4 Solid Capacitors on each card.
2. 60cm OD 5.5 high quality USB 3.0 riser cable.
3. 4PIN, SATA and Graphic card 6PIN interface, three interface optional.
4. No drivers needed.
5. Perfect to set up Ethereum mining rigs
6. 4 Holes on the riser card to fasten.
7. LED indicator and fuse are used on the board.
8. Board dimensions: 13cm x 4.4cm x 1.2cm

Package includes:
1x PCI-E 16X riser board
1x PCI-E 1X adapter card
1x 60cm OD 5.5 high quality USB 3.0 riser cable

Product Features

  • More Port option: molex 4Pin, SATA 15Pin and Graphic card 6PIN interface, three interface optional. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment.
  • LED indicator and fuse are used on the board: Indicates the connection status between your devices.
  • 4 Solid Capacitors deliver power to Graphics stably and Added coil to prevent interference,Long time work will produce electromagnetic waves,affecting transmission,This special coil unit absorbs this electromagnetic wave.
  • 60cm OD5.5 high quality USB 3.0 cable,It with shield net inside and Tin-plated bronze wires is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
  • Slot color is sent randomly:Due to the shortage of raw materials, randomly send, it does not affect the riser’s function.