S9 Specifications: 1. Hash Rate: 13.5TH/s ±5% 2. Power Consumption: 1323W ±10% (at the wall, with APW3, 93% efficiency, 25C ambient temp) 3. Power Efficiency: 0.098 W/GH ±10%(at the wall, with APW3, 93% efficiency, 25°C ambient temp) 4. Rated Voltage: 11.60 ~13.00V 5. ASIC Chip: BM1387 6. Dimensions: 350mm(L)*135mm(W)*158mm(H) 7. Cooling: 2x 12038 fans 8. Operating Temperature: 0 °C to 40 °C 9. Network Connection: Ethernet 10. Frequency automatically set Please note the following: 1. Each AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source) There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All TEN 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. 2. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter. 3. Power supply unit is included. Bitmain recommends the APW3 only if you have a 205-264v outlet, for voltages lower than 205v please use the EVGA 1600 g2 instead. 4. Cord included.
- Power Supply and cord included.
- Most Power Efficient Miner in Existence: 0.098 J/GH ±7%
- Built-in web management portal. No separate host computer required.
- Hash Rate: 13.5TH/s ±7%
- AntMiner APW3 power supply recommended only if you have 205v-264v outlet.